When I started first using Tasker back in around 2013 or so, I was mesmerized but what you could do with it. This was because at the time, too, I was rooted, so it really changed the possibilities with modes and so forth with Tasker. For example, NFC unlocking the phone when you tapped it to a NFC tag while the screen was OFF. That was killed by Google in Android 5 but before then, it was awesome! Tap on the tag and your phone would perform whatever task you told it do. Over the years, Google and other Android makers have slowly added different functions that Tasker was doing before them.

Since Tasker was taken over by the current Dev, it’s make many leaps and bounds over what it could before and simpler now. My tasks are:

Turn volume up ALL THE WAY for specific contacts and then back to the before volumes after the call. I have an older mother which hopefully live longer than 10 more years, but closing in on 80 years young, she’s going to get more fragile with her age so, my sister who lives near her, can call me in any issues pop up. (I live about 5 hours away). So, it’s essential to know when she’s calling me. On the same theme, when she texts me, I have it announce via TTS that she sent me a text. It’s also handy for when my wife calls me!

The phone restores the volume from silent when unplugged from the power charger in the morning ONLY after 7AM. I work from home and awake around 4:30am daily and around 7 is a good time to return sounds in the home. But, it is also conditional, so if on the weekend, I don’t wake up until 8am), it won’t turn sound on until I unplug it. (NOTE: The tasks to raise volume for the callers will override this mode which is good!)

The phone also turns the volume off at 9pm nightly since there’s no reason to have it make noise after then, all are home and pretty much it’s peaceful time.

The phone also sends a signal to my August Lock to send the unlock command when it put it my back pocket by reading a NFC Tag which contains a webhook to call Home Assistant to give the unlock instruction to the door lock.

When certain apps I define are open, it keeps the screen on all the time. I use this all the time when I’m at the store and running a calculator so it’s always up. A few other apps as well, but not too many.

A few others such as toggling the Private DNS server on my phone (I use dns.adguard-dns.com) on the phone to block advertisements and sometimes it doesn’t work so having a widget to toggle that off and on is super nice instead of navigating to it in settings.

I used to use Wiregaurd (Now on Tailscale), but before then, I had a task which would auto connect me to the Wireguard tunnel on my home network immediately disconnected from my WiFi, this ensured that I was always 100% on my home network. Tailscale does the same thing (If you set it to be always connected to your tunnel) , but I’ve been playing with that for a bit over a year and have pretty much settled there for now. My wireguard Tasker Profile for anyone interested:

https://taskernet.com/shares/?user=AS35m8nTnqPjajvNWFTA0s2cuT8IdHNE46iSJeH3U9724uLffLDxxiIVTbFo1jKBcieTRlRsEw%3D%3D&id=Project%3AWireguard+Toggles

Before the lock down of Covid, I used to have a profile which I still keep on which would trigger if I was NEAR a SSID for my work to silence my phone and restore the volume if I was away from it (or if I’m connected to my car’s stereo bluetooth if near the SSID). This worked flawlessly and never worried about stupid app notifications during work which would be frowned on. I occasionally go to the office and forget sometimes it’s triggered. :)

One that I’ve worked on for the last years, so sparingly was making a Google Voice robot which would see which contact you called and then send the calls through Google Voice instead of my phone dialer. I’ve made it work but not all the time, so never have trusted it. (I only give my cell number to my family and very trusted friends, everyone else gets my Google Voice number).

My Voice Robot project which is stale as I’ve had been busy with health issues off and on and life events otherwise:

https://taskernet.com/shares/?user=AS35m8nTnqPjajvNWFTA0s2cuT8IdHNE46iSJeH3U9724uLffLDxxiIVTbFo1jKBcieTRlRsEw%3D%3D&id=Project%3AGoogle+Voice+Robot

Overall, your imagination is the limiting factor for what you can do with Tasker, the dev has also made it so you can take 100% control over the phone by making Tasker the device owner which bypasses the need for root. I haven’t done it with my Pixel, but on the Samsung I had, it worked, but broke a work app so I disabled it (Requires a factory reset to enable and also disable it).

I prefer the WYSIWYG get with Joplin and mostly because I’m stuck in my ways!! LOL
Nothing really wrong with it though, it’s just not for me. :)

To add to this, I have tried Obsidian notes which is super highly recommended by many. I also have tried self hosting Bookstack for logging my notes etc… But every time I tried it, nothing ever matched what I could do with Joplin which was exactly as what other said, rock solid and I have yet to run into any device which can’t handle the client. I will say that the launch time on the one on my machine (Arch Linux) is a bit slow, but after it’s launched, it’s very easy to bring up and use as needed. :)

I have a Pixel 8a from Verizon, as someone else here said, they sometimes have crazy deals. This was a free one (through bill credits) for us. It was right after Google released that version and before 9. I quickly discovered that even with Google’s beta program which you can FREELY USE and all it requires you to do is connect your phone via usb through the web and it patches your phone via Google’s site to install it. I’m a beta testing type of person, so I was all in, until I discovered there was no way no how because of the bootloader.

Then, on top of that the, GraphineOS is not able to be installed with it locked as well. I haven’t approached Verizon about unlocking the bootloader. I’ve heard some success stories on XDA I think it was about people getting theirs unlocked through them. (Probably if you get a tech who’s in a good mood helps).

I did, but it’s a home machine, personal use. So, it didn’t matter for me, but for family…that was another story! :) I just pulled the main boot drive, put a different one and installed it and went through the process. Then went back to the Proxmox drive after.

I’m in the same boat, I tried Incus or rather LXD a couple months back and gave up after a little while due to pressing business needing the Proxmox machine up again.

I have two main requirements which I have for my server:

• It must support Home Assistant OS as a VM and a USB Dongle (Zwave) I found this as a possible solution for LXD systems: https://seanblanchfield.com/2023/05/home-assistant-os-in-lxd

• It must support NFS exports so I can share my storage and data drives. I’m pretty sure since it’s on Debian, I can install Cockpit and it’s sharing plugin for this.

I think the thing which scared me off at the time too was the lack of GUI which I think I may have missed. This may be a solution: https://blog.simos.info/how-to-install-and-setup-the-incus-web-ui/

I was just thinking about Incus the other day so this might be a good time to look into it more!

Sadly, it’s for Haswell and higher, I’m on an older Sandy Lake CPU so could not get it to boot and then I saw in their Wiki about the requirements. Yeah, it’s an old PC. (~14 yrs old and as temperamental as a teenager!) :)

I use Gotify I self host it and it uses an app on my Android, super easy to set up and use. I tie in Home Assistant and a few other setups with it and it runs great.

I deal with an issue with Firefox where it causes my Home Assistant dashboard become non responsive if the tab is not the primary one always on screen. I think it’s something with the forced snoozing of tabs. I’ve tried other Firefox based browsers and face the same problem. So this leaves me with… Chromium based browsers. As a Linux user, it’s either Firefox or Chromium based. With that said, I have not had the issue with the Chromium base, but because it’s mostly consumed by Google, I reject it mostly.

I did find that Zen was very nice to look at, and they do have an opinionated way of setting up the tabs (I don’t care about the vertical tabs). They also seem to be wanting to roll out their own extension store? In the form of “Zen Mods” but are also cross compatible with Firefox Extensions so that’s good I guess. I use a rolling release (Arch) OS, so I do see a lot of updates to Zen, the devs seem to be really working on it. For now - I’m on Firefox dealing with the unusual Home Assistant thing. I’ve used Firefox since it was before version 1 so I’m a bit stuck in my ways. :)

I really wish that there was another browser engine there which I could use which supports the Adblocking and Bitwarden (My most important extensions). It’s a bit disappointing to see that Edge, and all other browsers have adopted the Chromium base. I am hoping that with the latest judgement and order against Google to sell off the Chrome browser, sticks and if so, that the new owner(s) will strip it of some of the garbage which has been forced on the code base. (Manifest v3 comes to mind). The only Chromium based one I tolerate on my system right now is Ungoogled Chrome and Vivaldi, who has said that they are resisting the Manifest V3 as much as they can and have a somewhat decent adblocking built in using their end. Even though I have DNS level adblocking, Ublock Origin fills the gap with some of the ads which gets past my end.

You just have to turn it off. It’s an accessibility feature if you don’t want it:

Not a software one, but back when I was a teenager doing hardware modifications (or attempting to at least), I had a very valuable to me Atari 130XE computer (35 or so years ago) I wanted to solder in some extra RAM or some chip (I don’t recall now) but I had problems removing the old one so I called up my friend who did electronics repair the Mainboard. It was raining that night I took it to him so I did what I thought was best. Put it in a black garbage bag to protect it. Lets just say the next morning is when I found out that Static + circuit boards is a bad thing. Never more than a valuable less for me than at that time. He was a good friend though and out of the goodness of his heart, he gave me a replacement one so I wouldn’t be without. (Mind you, these were out of production and considered obsolete at the time maybe worth $40 at the time) and not yet vintage as they would be seen today where in some markets can fetch upward to a few hundred more as is.

I have an Rpi4 4gb model and run Uptime-Kuma who’s sole purpose is to monitor my server and alert me if it should go down. I also have it acting as a Tailscale exit node.

I’m about 99% sure it does, I don’t use it that way but It does allow DNS zones. For example:

It’s a lot more technical then Adguard Home for sure. Both work just fine though, I came from Adguard Home as I use a PXE server to provision some of my devices and Technitium is super easy to configure that.

I had to create an account as per the usual process for these types of apps, but it was all local. I never had to do one to connect to their servers. I know it generates a unique instance ID which I believe phones home to their servers but I don’t mind personally.

As for my experience, a lot of it is locked behind their paid plans, so I just keep it limited to what I use which is fine. I do like it as it does better than NocoDB for my needs (the input forms is what I needed) and it does better there. I don’t recall the other reasons for not using NocoDB otherwise, but it’s a long while.

Their pricing is here: https://baserow.io/pricing

So, that’s mostly what is locked behind. My sleep form I built which feeds the database:

Overall, it does meet my needs so that’s all I ask. :)

In no particular order, the most essential ones are those I constantly use throughout my day and also weekly.

Proxmox holds all of these in different LXC’s and VM’s

• Home Assistant
• Pocket-ID - https://github.com/stonith404/pocket-id (Exclusive Passkey login system as in -no un/pw just your Passkey which - doubles as an OIDC provider)
• Homepage (By Ben Phelps of gethomepage.dev)
• Vaultwarden
• TechnitiumDNS which handles all of my DHCP and Adblocking in a one system, extremely capable software especially useful for SOHO too.
• Baserow - Airtable alternative. It holds certain items of importance like what MAC address each device in my home network holds and what IP It uses in an intelligent view. I also was using it for a while to log issues with my sleep where I deal with insomnia, so I logged how well I slept, how many times I woke up, how long it took me to fall asleep etc. That was a simple form I created using drag/drop in Baserow and called by a URL.
• OpenVSCode server - makes editing my Homepage (above) yaml and my docker-compose files a breeze! It’s especially nice when you edit it something and it auto saves almost instantly. Makes some of my services change in real-time!
• UptimeKuma - Simply one of the best out there for me
• Gotify - I get alerted to my Tuya based dehumidifer tank being full via Home Assistant, Downtime alerts from UptimeKuma and a variety of other services which I deem higher priority alerts over “fix when you can” ones.

Aside from that, i do have other services I use every so often like Memos, Joplin Server (holds most of my notes), Pingvin and a few others.

Good to know about the 5Ghz WiFi on the newer devices.

I’m still new to Matter so I appreciate the info you gave for not all devices not using WiFi. :)

Matter runs over your WiFi so as long as your server you run Home Assistant on for example has wired or wireless access you are good to go. My Home Assistant is on LAN and wired so no wireless, but they all communicate through the WiFi network. if you have a Bluetooth dongle or onboard, Home Assistant would also use that to pair and communicate if needed.

2.4Ghz WiFi is only supported and no newer generations yet.

Honestly, if I have the option to keep it toggled on/off I’m fine with it, but I also don’t see it in my latest update which came in last night. But not too concerned yet (Pixel 8a) so it’s still pretty new I guess. :)

Instability you ask? This is like a slow creep to instability and freeze your system. It’s called the Bash Fork Bomb (look it up if you want), but it’s a copy/paste you put in and it slows your system down by consuming all the system resources and cause it to lock up HARD. It goes away after a system reboot, though.

I was going to post the code here, but decided to play nice. But if you are curious:

https://itsfoss.com/fork-bomb/

(edit: Made ‘slow’ ‘slows’)

I tried it the other night on my Pixel (Android 15) and had no issues. I’ve been trying out different launchers in an attempt to find one which isn’t asking for a monthly or yearly sub and has horizontal app drawer as an option! Both of which are getting to be more rare these days. I couldn’t see where to make the drawer scrollable on Lawnchair, so I skipped it for now.