Basically what the title says. Here’s the thing: address exhaustion is a solved problem. NAT already took care of this via RFC 1631. While initially presented as a temporary fix, anyone who thinks it’s going anywhere at this point is simply wrong. Something might replace IPv4 as the default at some point, but it’s not going to be IPv6.

And then there are the downsides of IPv6:

  • Not all legacy equipment likes IPv6. Yes, there’s a lot of it out there.
  • “Nobody” remembers an IPv6 address. I know my IPv4 address, and I’m sure many others do too. Do you know your IPv6 address, though?
  • Everything already supports IPv4
  • For IPv6 to fully replace IPv4, practically everything needs to move over. De facto standards don’t change very easily. There’s a reason why QWERTY keyboards, ASCII character tables, and E-mail are still around, despite alternatives technically being “better”.
  • Dealing with dual network stacks in the interim is annoying.

Sure, IPv6 is nice and all. But as an addition rather than as a replacement. I’ve disabled it by default for the past 10 years, as it tends to clutter up my ifconfig overview, and I’ve had no ill effects.

Source: Network engineer.

  • elgordino@fedia.io
    link
    fedilink
    arrow-up
    54
    ·
    6 months ago

    43% of Google traffic is now ipv6 and steadily growing

    https://www.google.com/intl/en/ipv6/statistics.html

    CGNAT is only a temporary band aid for reaching services that are yet to present themselves on IPV6. It’s relatively expensive to operate.

    IpV6 might be largely pointless on a LAN, and sure NAT is fine there, but ipv6 already running large chunks of the world’s mobile infrastructure. It’s not going anywhere.

  • Boozilla@lemmy.world
    link
    fedilink
    English
    arrow-up
    27
    ·
    edit-2
    6 months ago

    Upvote for semi-unpopular opinion.

    I think you’re wrong about the shortage being ‘solved’ by NAT. NAT is great for LAN and WAN in the developed world, but there are billions of folks in remote developing areas where it’s not much help. It also severely limits the big chunks of address spaces that can be allocated to business, universities, governments, etc. It is not a trivial problem waved away by NAT.

    I think it will continue to be a very gradual but relentless rollout of IPv6. Not saying it will be fast. But 30 years from now, if we haven’t destroyed civilization, I suspect IPv4 will be a quaint relic. And IPv6 will never run out of addresses.

    • Eyron@lemmy.world
      link
      fedilink
      English
      arrow-up
      2
      arrow-down
      2
      ·
      edit-2
      6 months ago

      There’s a large possibility we’ll run out of IPv6 addresses sooner than we think.

      Theoretically, 128-bits should be enough for anything. IPv6 can theoretically give 2^52 IPs to every star in the universe: that would be a 76-bit subnet for each star rather than the required 64 minimum. Today, we (like ARIN) do 32-48-bit allocations for IPv6.

      With IPv4, we did 8-24-bit allocations. IPv6 gives only 24 extra allocation bits, which may last longer than IPv4. We basically filled up IPv4’s 24-bits of allocations in 30 years. 281 trillion (2^48) allocations is fairly reachable. There doesn’t seem to be any slowdown of Internet nor IP growth. Docker and similar are creating more reasons to allocate IPs (per container). We’re also still in the early years of interstellar communications. With IPv4, we could adopt classless subnetting early to delay the problem. IPv6’s slow adoption probably makes a similar shift in subnetting unlikely.

      If we continue the current allocation trend, can we run out of the 281 trillion allocations in 30 years? Optimistically, including interstellar networks and continued exponential growth in IP-connected devices? Yes. Realistically, it’s probably more than 100 years away, maybe outside our lifetimes, but that still sounds low when IPv6 has enough IPs for assigning an IP to every blade of grass, given every visible star has an Earth. We’re basically allocating a 32-48 bit subnet to every group of grass, and there are not really enough addresses for that.

      • mitchty@lemmy.sdf.org
        link
        fedilink
        English
        arrow-up
        7
        ·
        6 months ago

        This is the worst math that ever mathed. IPv4 is 32 bits of address space. IPv6 is 128. That is 2^32 vs 2^128. Not 2^52, which isn’t even wrong it’s just weird, hopefully this is just some weird performance joke. There are enough addresses in ipv6 to address every known atom on earth. We aren’t running out anytime soon. 96 doublings of IPv4s address space is a number you can’t fathom.

        • Eyron@lemmy.world
          link
          fedilink
          English
          arrow-up
          5
          ·
          edit-2
          6 months ago

          That wasn’t what I said. 2^56 was NOT a reference to bits, but to how many IPs we could assign every visible star, if it weren’t for subnet limitations. IPv6 isn’t classless like IPv4. There will be a lot of wasted/unrunused/unroutable addresses due to the reserved 64-bits.

          The problem isn’t the number of addresses, but the number of allocations. Our smallest allocation, today, for a 128-bit address: is only 48-bits. Allocation-wise, we effectively only have 48-bits of allocations, not 128. To run out like with IPv6 , we only need to assign 48-bits of networks, rather than the 24-bits for IPv4. Go read up on how ARIN/RIPE/APNIC allocate IPs. It’s pretty wasteful.

          • mitchty@lemmy.sdf.org
            link
            fedilink
            English
            arrow-up
            2
            ·
            6 months ago

            I’m fully aware how rirs allocate ipv6. The smallest allocation is a /64, that’s 65535 /64’s. There are 2^32 /32’s available, and a /20 is the minimum allocatable now. These aren’t /8’s from IPv4, let’s look at it from a /56, there are 10^16 /56 networks, roughly 17 million times more network ranges than IPv4 addresses.

            /48s are basically pop level allocations, few end users will be getting them. In fact comcast which used to give me /48s is down to /60 now.

            I’ll repeat, we aren’t running out any time soon, even with default allocations in the /3 currently existing for ipv6.

            • Eyron@lemmy.world
              link
              fedilink
              English
              arrow-up
              2
              ·
              edit-2
              6 months ago

              I’m fully aware how rirs allocate ipv6. The smallest allocation is a /64, that’s 65535 /64’s. There are 2^32 /32’s available, and a /20 is the minimum allocatable now. These aren’t /8’s from IPv4, let’s look at it from a /56, there are 10^16 /56 networks, roughly 17 million times more network ranges than IPv4 addresses.

              /48s are basically pop level allocations, few end users will be getting them. In fact comcast which used to give me /48s is down to /60 now.

              I’ll repeat, we aren’t running out any time soon, even with default allocations in the /3 currently existing for ipv6.

              Sorry, but your reply suggests otherwise.

              The RIRs (currently) never allocate a /64 nor a /56. /48 is their (currently) smallest allocation. For example, of the ~800,000 /32’s ARIN has, only ~47k are “fragmented” (smaller than /32) and <4,000 are /48s. If /32s were the average, we’d be fine, but in our infinite wisdom, we assign larger subnets (like Comcast’s 2601::/20 and 2603:2000::/20).

              These aren’t /8’s from IPv4. let’s look at it from a /56, there are 10^16 /56 networks, roughly 17 million times more network ranges than IPv4 addresses.

              Taking into account the RIPE allocations, noted above, the closer equivalent to /8 is the 1.048M /20s available. Yes, it’s more than the 8-bit class-A blocks, but does 1 million really sound like the scale you were talking about? “enough addresses in ipv6 to address every known atom on earth”

              The situation for /48s is better, but still not as significant as one would think. With Cloudflare as an extreme example: They have 6639 IPv4 /24 blocks, but 670,550 IPv4 /48 blocks. Same number of networks in theory, but growing from needing 13-bits of networks in IPv4 to 19-bits of networks: 5 extra bits of usage from just availability.

              That sort of increase of networks is likely-- especially in high-density data centers where one server is likely to have multiple IPv6 networks assigned to it. What do you think the assignments will look like as we expand to extra-terrestrial objects like satellites, moons, planets, and other spacecraft?

              I’ll repeat, we aren’t running out any time soon

              Soon vs never. OP I replied to said “never”. Your post implied similarly, too-- that these numbers are far too big for humans to imagine or ever reach. The IPv6 address space is large enough for that: yes. But our allocations still aren’t. The number of bits we’re actually allocating (which is the metric used for running out) is significantly smaller than most think. In the post above, you’re suggesting 56-64 bits, but the reality is currently 20-32 bits-- 1M-4B allocations.

              If everyone keeps treating IPv6 as infinite, the current allocation sizes would take longer than IPv4 to run out, but it isn’t really an unfathomable number like the number of atoms on Earth. 281T /48s works more sanely: likely enough for our planet-- but RIPEs seem to avoid allocating subnets that small.

              IPv4-style policy shifts could happen: requirements for address blocks rise, allocation sizes shrink, older holders have /20 blocks (instead of 8-bit class A blocks), and newer organizations limited to /48 blocks or smaller with proper justification. The longer we keep giving away /20s and /32s like candy, the more likely we’ll see the allocations run out sooner (especially compared to never). My initial message tried to imply that it depends on how fast we grow and achieve network growth goals:

              30 years? Optimistically, including interstellar networks and continued exponential growth in IP-connected devices? Yes.

              . . .

              Realistically, it’s probably more than 100 years away, maybe outside our lifetimes

              • mitchty@lemmy.sdf.org
                link
                fedilink
                English
                arrow-up
                2
                arrow-down
                1
                ·
                6 months ago

                Sorry, but your reply suggests otherwise.

                I’m at work, I’m not going to go into a thesis on ip allocation.

                The RIRs (currently) never allocate a /64 nor a /58. /48 is their (currently) smallest allocation. For example, of the ~800,000 /32’s ARIN has, only ~47k are “fragmented” (smaller than /32) and <4,000 are /48s. If /32s were the average, we’d be fine, but in our infinite wisdom, we assign larger subnets (like Comcast’s 2601::/20 and 2603:2000::/20).

                Correct all noted here https://www.iana.org/numbers/allocations/arin/asn/

                Taking into account the RIPE allocations, noted above, the closer equivalent to /8 is the 1.048M /20s available. Yes, it’s more than the 8-bit class-A blocks, but does 1 million really sound like the scale you were talking about? “enough addresses in ipv6 to address every known atom on earth”

                If you’re going to go through and conflate 2^128 as being larger than the amount of atoms on earth to a prefixing assignment scheme I’m just going to assume this is a bad faith argument.

                Have a good one I’m not wasting more time on this. The best projections for “exhausting” our ipv6 allocations is around 10 million years from now. I think by then we can change the default cidr allocations.

                https://samsclass.info/ipv6/exhaustion-2016.htm

                Its old sure but not worth arguing further.

  • shortwavesurfer@monero.town
    link
    fedilink
    English
    arrow-up
    13
    ·
    6 months ago

    I have actually found IPv6 simpler to set up and manage than I thought it would be. As I run at least one or two internet facing services from my home network, which I cannot do with IPv4 because my ISP is fully CGNAT. I even successfully set up my own static IPv6 address on my server so that I can just point my domain name at it and then anything I need I can just hit my domain and it will give the IP address instead of me having to remember it.

    • AA5B@lemmy.world
      link
      fedilink
      English
      arrow-up
      1
      ·
      6 months ago

      Granted I have very simple requirements, so It does seem pretty easy, except

      • there are still too many devices that don’t support it
      • too many ISPs don’t support it, including mine

      So switching to IPv6 means running dual stack and setting up a tunnel, and I probably need to relearn firewalls. I’m not sure any of those are very difficult but it’s enough, especially since there’s no clear win here

      If Matter-Thread ever gets off the ground that would help: most of my newer IPv4-only devices are home automation so switching to an IPv6-based protocol should finally make that happen

  • YourPrivatHater@ani.social
    link
    fedilink
    English
    arrow-up
    16
    arrow-down
    3
    ·
    6 months ago

    As a network engineer you should be aware that ipv4 doesn’t have enough addresses (thanks Microsoft and “the internet of things” for this) and that the temporary fix is temporary, all new systems and devices do support ipv6 for a reason. And using ipv4 in the internal networks of a company/facility is absolutely fine if there is equipment that doesn’t, the stuff usually doesn’t need to connect to the outside anyway.

    You don’t remember a ipv4 either, you usually connect to stuff with a domain. The ipv4 you remember is probably just the default router website address, as your ipv4 does change regularly, at least the relevant one to the outside.

    Btw ASCII is absolutely outdated for the most part, most shit nowadays is done in UTF-8 (Unicode) as ASCII lacks a load of character.

    QWERTY is still around because the difference to the other options is basically nonexistent and doesn’t justify the relearning of writing on a PC for millions of people, same with every other keyboard layout commonly used today like QUERTZ or AZERTY.

    Currently the fix still holds up, wich is great, but it won’t do so forever, we literally hook up more and more stuff to the internet and everything needs a IP… From the “Smart” light bulb to the newest car receiving radio over the internet, sending emergency messages over the internet and so on. We will someday run out of ipv4 capacity.

    Source: same field of word (i btw absolutely understand that its annoying as shit, cause it is, but we won’t get around it some day)

    • leftzero@lemmynsfw.com
      link
      fedilink
      English
      arrow-up
      2
      ·
      6 months ago

      You don’t remember a ipv4 either

      172.26.0.37. That’s the IP of the frggin’ Kyocera printer that takes way too many clicks to configure for every new user. And we get new users… about bi-monthly, which you’d think isn’t that bad, but that interface is downright kafkian.

      I don’t remember the router’s IP. I more often than not don’t remember the DNS servers. But that thing… that thing I remember.

      • YourPrivatHater@ani.social
        link
        fedilink
        English
        arrow-up
        2
        ·
        6 months ago

        XD Printers are the bane of humanity. They shouldn’t exist. Its easier to hook up a typewriter with a industrial robot to do printing than some printers, and its cheaper…

        • neidu2@feddit.nlOP
          link
          fedilink
          English
          arrow-up
          2
          ·
          edit-2
          6 months ago

          Printers should be renamed “Tree-taggers” or something similar. Give it a name that makes the concept sound as bad as the implementation.

  • calamityjanitor@lemmy.world
    link
    fedilink
    English
    arrow-up
    12
    ·
    edit-2
    6 months ago

    IPv6 isn’t just larger addresses, it was meant to totally remove the need for layer 2 / MAC addresses, bus networks, DHCP, and broadcasts. Since the plan was to get rid of the 12 byte ethernet header, the 24 byte increase in IP addresses would only be a 12 byte increase in header at the end of the day. WiFi wouldn’t need three MAC addresses in every packet. IPv6 only achieves it’s true potential with a complete switch over.

    I personally don’t think that can ever happen. The opportunity to switch everyone over is absolutely long gone. IPv6 isn’t an extension of v4 or a compatible replacement, like ASCII to UTF-8. It’s more like X to Wayland. The protocol authors went “This is a mess we gotta rethink this from scratch”. But there’s so much already relying on the old protocol, and replacing it with something that doesn’t perfectly match features is difficult for little reward for users.

    The increase in IPv6 nodes has mostly been due to mobile networks. The tragedy is they actually still mostly use layer 2 and bridge networking. IPv4 nor v6 can handle maintaining connections while addresses change. So they set it up so that you keep the same IP address as you travel and move between different towers. This is done with massive virtual layer 2 LANs across towers, with the IP routing happening at a central datacentre. IPv6 is simply used for the larger addresses, and none of the network/protocol simplifications it promised can be used.

  • BradleyUffner@lemmy.world
    link
    fedilink
    English
    arrow-up
    11
    ·
    6 months ago

    You say that something may replace IP4, but it won’t be IP6, then you list a lot of reasons why it can’t be IP6, except all those reasons would apply to whatever that something is also.

  • brian@programming.dev
    link
    fedilink
    English
    arrow-up
    11
    arrow-down
    1
    ·
    6 months ago

    Why would I need to remember an ip address if I have a hostname? I don’t know my ipv4 anywhere since it’s all dynamic.

    Standards like those change just fine. Sure some stuff uses ascii still, but almost everything I encounter is unicode. Email has had so many things added on over the years that that’s not a fair comparison either. Other countries have plenty of kb layouts that are more popular locally than qwerty but came afterwards.

    At some point ipv6 will be the default and we’ll just use compatibility layers to access ipv4 only things. We don’t need every device on board, just the ISPs

  • If i had a nickle for every time ive seen ipv6 hate this week id have 2 nickels which isnt much bit its weird that it happened twice.

    The only reason i can think of to dislike ipv6 is if i was an authoritarian who hated the p2p capabilities it provoded.

    Also go watch apalrd’s video on ipv6 migration u know u can actually spell words in ur ipv6 address.

    • neidu2@feddit.nlOP
      link
      fedilink
      English
      arrow-up
      2
      arrow-down
      1
      ·
      6 months ago

      More popular than I anticipated, but at least somewhat controversial based on the vote ratio.

      • JesterIzDead@lemm.ee
        link
        fedilink
        English
        arrow-up
        2
        arrow-down
        3
        ·
        6 months ago

        Which is hilarious because you hit the nail on the head. IPV6 is not new, it would have long ago been adopted if ever it were gonna. Who is still holding out hope….and why? lol

      • halcyoncmdr@lemmy.world
        link
        fedilink
        English
        arrow-up
        1
        ·
        6 months ago

        Well, there are actually 3 private address ranges in IPv4.
        10.0.0.0 – 10.255.255.255 (10.0.0.0/8)
        172.16.0.0 – 172.31.255.255 (172.16.0.0/12)
        192.168.0.0 – 192.168.255.255 (192.168.0.0/16)

        For IPv6 the rough equivalent is a Unique Local Address.
        fc00::/7