I agree with you, however Jellyfin is not intrinsically more secure than any other piece of software. You have to be very careful how you go about deploying it if you open up external access, as you are dependent on the Jellyfin devs to fix vulnerabilities and they aren’t actually being paid to do this. If you’re paranoid about privacy, you should be paranoid about this too; the people sending subpoenas aren’t above port-scans on ISP subscribers, they did it back in the early days of torrents.

You get control and privacy, but you also get responsibility. It’s a trade-off, and one I’d certainly make if Jellyfin were more mature. That’s just me though, I’ve been hosting my own stuff for about a decade now and I can set up an isolated environment for Jellyfin to run within. Plex is a lot more newbie-friendly and I’d still recommend it for most folks unless they for sure know what they’re doing.

As an aside, these concerns are common to all FOSS software that don’t have deep-pocketed backers. Jellyfin is likely never getting those, unfortunately. I hope they can find some other way of sustaining themselves, they’ve not got much money for the scale of development needed and it’s all volunteer-driven today.

https://opencollective.com/jellyfin

I want them to keep going, and I’ve even donated to them. I still don’t think it’s at a place to replace Plex for most people yet though.

Left a comment further down: https://lemmy.world/comment/13599910

Switching between wasn’t seamless, it kept forgetting where I left off on the last device, which was pretty annoying. Also, mobile/remote connectivity was spotty for me. Never got to the bottom of that, but my best guess is Plex’s relay system makes up for a lot of random network issues. My best work-around was to add my phone to tailscale, but obviously that’s not a great solution and won’t work for a lot of devices.

Overall, my impression was that Plex is a lot more polished. I also bought a lifetime membership years ago, so I have no incentive to switch to something that isn’t better. Plex isn’t perfect, but it was still better than Jellyfin as of a few months ago. I honestly hope that changes soon, I have zero faith in Plex as a company.

I’m in the same boat as you. I’d love to switch but the user experience of Jellyfin is still pretty bad outside the most basic cases. If you have a media center PC, it’s fine, but if you want to be able to switch between several devices the way you can with Netflix, it’s quite poor.

Plex is slowly trending down and Jellyfin is slowly trending up. I hope Jellyfin outpaces Plex before the enshittification is complete, but it’s a steep hill to climb.

The math here is beyond me, but this statement from the paper seems contradictory:

The obtained equation is covariant in space–time and invariant with respect to any Planck scale. Therefore, the constants of the universe can be reduced to only two quantities: Planck length and Planck time.

Planck time is derived from the speed of light and the gravitational constant. So wouldn’t there be at least four universal constants?

figma balls

It’s really more of a proxy setup that I’m looking for. With thunderbird, you can get what I’m describing for a single client. But if I want to have access to those emails from several clients, there needs to be a shared server to access.

docker-mbsync might be a component I could use, but doesn’t sound like there’s a ready-made solution for this today.

Yeah, they are ideally the same mailbox. I’d like a similar experience to Gmail, but with all the emails rehomed to my server.

Steam + Proton works for most games, but there are still rough edges that you need to be prepared to deal with. In my experience, it’s typically older titles and games that use anti-cheat that have the most trouble. Most of the time it just works, I even ran the Battle.net installer as an external Steam game with Proton enabled and was able to play Blizzard titles right away.

The biggest gap IMO is VR. If you have a VR headset that you use on your desktop and it’s important to you, stay on Windows. There is no realistic solution for VR integration in Linux yet. There are ways that you can kinda get something to work with ALVR, but it’s incredibly janky and no dev will support it. There are rumors Steam Link is being ported to Linux, nothing official yet though.

On balance, I’m incredibly happy with Mint since I switched last year. However, I do a decent amount of personal software development, and I’ve used Linux for 2 decades as a professional developer. I wouldn’t say the average Windows gamer would be happy dealing with the rough spots quite yet, but it’s like 95% of the way there these days. Linux has really grown up a lot in the last few years.

Ralph Nader saying that he thinks the death toll is over 200k is not a reasonable source to cite. The 30-50k estimates from most sources are already appallingly high. There’s an active contingent of Ben Shapiro types trying to convince everyone what Israel is doing is fine, don’t give them ammo to cast doubt on the official death count.

Not sure where that 200k number is from. The article you linked doesn’t say that and I haven’t seen a number that high reported anywhere myself. All the info I have seen bounds the estimates between 30k and 50k killed, either through active combat or through disease/malnourishment/injury.

https://www.aljazeera.com/news/longform/2023/10/9/israel-hamas-war-in-maps-and-charts-live-tracker

I’m sure there are plenty of Israelis that want to do this even if they won’t admit it to themselves but this isn’t the final anything. The IDF has killed around 37,000 Palestinians out of ~2.3 million. That’s horrible but nowhere near the “barely any left” stage.

A genocide on the scale of millions takes industrial effort to accomplish. I’m not saying it couldn’t happen, but given Israel’s reliance on foreign aid, current industrial capacity, and political position, it seems unlikely. My guess is Israel will take some more territory and the conflict (kinda tough to call the IDF bombing almost exclusively civilians a war) will peter out. Foreign aid will be allowed back in and Israel will put its mask back on.

Personally, I don’t see how this doesn’t end with half the middle east actively going to war with Israel if they don’t stop soon. The only thing really keeping them safe is the US, and Israel has burned a lot of political capital here. Their leaders are awful, power-hungry shits, but they’re not stupid. If they don’t try to rebuild some of that capital, there’s every chance that Israel loses its lifeline.

What comes years after things die down, I don’t know. Gazan sentiment towards Israel was already overwhelmingly negative before this, but the IDF has never done anything on this scale before. I don’t think Israel can allow Gaza any type of self-governance for decades after this. This is beyond even post-WW2 Japan levels of destruction, and unlike Japan every nation around them is still on their side.

Yeah, I don’t fully understand why Nvidia cards have this problem on first setup with so many distros. On Windows, the default display driver can at least boot with reduced resolution on most cards made in the last 15 years until you install proper drivers. It seems like the Linux kernel and common desktop environments ought to be able to do the same.

Maybe this is better in the 6.x kernel, I haven’t tried it. I’m not too much of a tinkerer, so the bleeding edge doesn’t interest me. I just want a good shell, POSIX for personal coding projects, and the ability to play games on Steam. Mint is great for that once you get past the initial display driver issues.

I’ve been using Mint for about 6 months now and it works with Nvidia just fine BUT the new user experience isn’t great. You have to use the nomodeset kernel option and install Nvidia drivers, otherwise you’ll boot to a black screen.

Helpful guide: https://forums.linuxmint.com/viewtopic.php?t=421550

You’re using “machine learning” interchangeably with “AI.” We’ve been doing ML for decades, but it’s not what most people would consider AI and it’s definitely not what I’m referring to when I say “AI winter.”

“Generative AI” is the more precise term for what most people are thinking of when they say “AI” today and it’s what is driving investments right now. It’s still very unclear what the actual value of this bubble is. There are tons of promises and a few clear use-cases, but not much proof on the ground of it being as wildly profitable as the industry is saying yet.

AI is not self-sustaining yet. Nvidia is doing well selling shovels, but most AI companies are not profitable. Stock prices and investor valuations are effectively bets on the future, not measurements of current success.

From this Forbes list of top AI companies, all but one make their money from something besides AI directly. Several of them rode the Web3 hype wave too, that didn’t make them Web3 companies.

We’re still in the early days of AI adoption and most reports of AI-driven profit increases should be taken with a large grain of salt. Some parts of AI are going to be useful, but that doesn’t mean another winter won’t come when the bubble bursts.

I do quite like the stability of Cinnamon/Debian, and I think this problem is solvable (even if I have to solve it myself). I generally do not want to spend a lot of time futzing around with my desktop environment, but this is one thing I need to have.

I saw that and tried it pretty early on. That just moves the screen, it doesn’t fill the quadrant.

Updated to be specific, I’m using Cinnamon. Muffin is the builtin tiling window manager for Cinnamon and it does exactly what you’re describing. The problem is that it moves tiles, it doesn’t absolutely position them. You have to keep moving tiles around to get them where you want them, Rectangle just has hotkeys to immediately place and resize to fit the active window for each quadrant that it supports:

• ctrl+cmd+left: top left quadrant
• ctrl+cmd+right: top left quadrant
• shift+ctrl+cmd+left: bottom left quadrant
• shift+ctrl+cmd+right: bottom left quadrant
• alt+cmd+left: left half
• alt+cmd+right: right half
• alt+cmd+up: top half
• alt+cmd+left: bottom half
• alt+cmd+f: full screen

It’s hard to express how natural that feels after using it for a bit, and I’m still using a Macbook for work so the muscle memory is not going away.

I didn’t say it wasn’t amazing nor that it couldn’t be a component in a larger solution but I don’t think LLMs work like our brains and I think the current trend of more tokens/parameters/training LLMs is a dead-end. They’re simulating the language area of human brains, sure, but there’s no reasoning or understanding in an LLM.

In most cases, the responses from well-trained models are great, but you can pretty easily see the cracks when you spend extended time with them on a topic. You’ll start to get oddly inconsistent answers the longer the conversation goes and the more branches you take. The best fit line (it’s a crude metaphor, but I don’t think it’s wrong) starts fitting less and less well until the conversation completely falls apart. That’s generally called “hallucination” but I’m not a fan of that because it implies a lot about the model that isn’t really true. Y

You may have already read this, but if you haven’t: Steven Wolfram wrote a great overview of how GPT works that isn’t too technical. There’s also a great sci-fi novel from 2006 called Blindsight that explores the way facsimiles of intelligence can be had without consciousness or even understanding and I’ve found it to be a really interesting way to think about LLMs.

It’s possible to build a really good Chinese room that can pass the Turing test, and I think LLMs are exactly that. More tokens/parameters/training aren’t going to change that, they’ll just make them better Chinese rooms.