I’ve been wondering if he will try the trillion dollar coin workaround.

Previously, no one’s been willing to open that can of worms, but this is Trump we’re talking about.

In fairness, my understanding is that there are a lot of complications with adding distributed power to existing grids. That doesn’t mean it shouldn’t happen, just that there are engineering and safety challenges when power is coming from “everywhere” vs centrally.

And of course, there’s a lot of energy companies lobbying against clean power sources as well.

One thing you could do that I don’t see mentioned here is to install Virtual Box in Windows and create a Linux Mint Virtual Machine. It’s basically installing a computer within a computer. You should be able to find some tutorials online.

This would let you try Linux Mint in a sandbox within Windows so that you could experiment a bit with everything before changing anything.

Just keep in mind that within the VM, things will be less performant, especially graphically, and certain peripherals, etc. might not work. But it would let you test out installing the software you want, the cloud storage solution you want, browsing around, etc.

Speaking of graphics, you’ll want to do some research about how well supported your GPU is. It will almost certainly “work” out of the box, but if you want to get the most performance out of it, like Windows, you’re going to need special drivers. I’ve heard Nvidia can be a bit of a pain, but I think it varies by model.

I wouldn’t be too worried about the touch screen as that will probably work - or at least has on every laptop I’ve tried. I’ve had more issues with things like fingerprint scanners generally speaking. Definitely check out everything you can think of when you install, like Bluetooth, cameras, microphone, peripherals, etc. Oh and when using the laptop definitely manually knock yourself down out of performance mode using the upper-righthand corner in gnome. For me at least, it makes a huge difference in battery life if I’m in performance vs balanced vs power saver. Windows is better at automatically making those adjustments.

I’ve also heard that lately Microsoft is making dual-boot harder - notably that Windows updates will just casually break your dual-boot and revert it to just Windows. I don’t know the details since it’s been years since I’ve done it myself, but something to keep in mind.

Finally I’ll throw out there to make sure you have a recovery plan if the install goes south. Have all your files backed up. Have a copy of Linux and Windows installers ready. It honestly should be fine, but especially if this is your only PC you don’t want to be stuck if you have some kind of issue, accidentally blow away your laptop’s SSD, etc . Not trying to scare you or anything, but better safe than sorry, right?

I’m pretty sure @ruud@lemmy.world has said before what he uses. I thought back in the day it was publicly listed with the expenses, but I couldn’t find it.

The most recent update I found was here: https://lemmy.world/post/75556

But it could definitely be old information, I’d take the other commenter’s advice and ask in the admin channel to be sure.

More of a debugging step, but have you tried running lsinitrd on the initramfs afterwards to verify your script actually got added?

You theoretically could decompress the entire image to look around as well. I don’t know the specifics for alpine, but presumably there would be a file present somewhere that should be calling your custom script.

EDIT: Could it also be failing because the folder you are trying to mount to does not exist? Don’t you need a mkdir somewhere in your script?

It looks like there are instructions here about hosting your own flatpak instance: https://docs.flatpak.org/en/latest/hosting-a-repository.html

Another solution to this situation is to squash your changes in place so that your branch is just 1 commit, and then do the rebase against your master branch or equivalent.

Works great if you’re willing to lose the commit history on your branch, which obviously isn’t always the case.

Sounds like a problem with Memmy. Does this link work? https://lemm.ee/c/sfah@hilariouschaos.com

You should be able to search communities in your app and could have searched “sfah@hilariouschaos.com” too.

But basically communities on Lemmy are in the form of “name@host”. The “name” can be whatever someone wants, and the “host” is the website / Lemmy instance where that community originates from. But because it is federated it’s all available everywhere (generally speaking). For example, if you visit https://lemmy.world/c/sfah@hilariouschaos.com it should be the same content just loaded via lemmy.world instead of lemme.ee. However if theoretically someone went and made a “sfah@lemmy.world” community, that would be a completely separate community from the above, hosted on a different Lemmy instance.

Out of curiosity, what content are you looking for? Discovery on Lemmy can be a problem, but sometimes the communities are there and even active, just buried.

But may I also suggest searching by Top Day/12-hour/6-hour to see the most active posts. Lemmy’s scaled algorithm still doesn’t get it quite right IMO.

The CEO said they were going to add pay-walled subreddits at an earnings call.

So… Yep.

I know for me, at least with gnome, toggling between performance, balanced, and battery saver modes dramatically changes my battery life on Ubuntu, so I have to toggle it manually to not drain my battery life if it’s mostly sitting there. I don’t know if Mint is the same, but just throwing out the “obvious” for anyone else running Linux on a laptop.

Out of curiosity, what switch are you using for your setup?

Last time I looked, I struggled to find any brand of “home tier” router / switch that supported things like configuring vlans, etc.

Maybe I am not thinking of the access control capability of VLANs correctly (I am thinking in terms of port based iptables: port X has only incoming+established and no outgoing for example).

I think of it like this: grouping several physical switch ports together into a private network, effectively like each group of ports is it’s own isolated switch. I assume there are routers which allows you to assign vlans to different Wi-Fi access points as well, so it doesn’t need to be literally physical.

Obviously the benefits of vlans over something actually physical is that you can have as many as you like, and there are ways to trunk the data if one client needs access to multiple vlans at once.

In your setup, you may or may not benefit, organizationally. Obviously other commenters have pointed out some of the security benefits. If you were using vlans I think you’d have at a minimum a private and public vlan, separating out the items that don’t need Internet access from the Internet at all. Your server would probably need access to both vlans in that scenario. But certainly as you say, you can probably accomplish a lot of this without vlans, if you can aggressively setup your firewall rules. The benefit of vlans is you would only really need to setup firewall rules on whatever vlan(s) have Internet access.

So maybe you’ve heard something I haven’t, according to this timeline, there was only 2-3 minutes between when the ship issued a mayday and the bridge collapsed: https://www.cbsnews.com/news/francis-scott-key-bridge-collapse-timeline-911-call-dali-cargo-ship-mayday-maps-construction-worker-recovery/

It sounded like there was 1 police officer already stationed on either end of the bridge, so thats the only reason they were even able to close the bridge before the collapse.

In the time it took them to do that, I can’t see how there would have been time to warn them physically (it’s like a 2 mile bridge). From the article, it sounded like there was confusion about if a crew was even on the bridge. I also don’t know how often / what mechanism police can use to directly contact crews, if there even is one.

NPR News Now publishes great little 5 minute podcast digests every hour or 2 summarizing the big news items of the day / hour.

Their politics podcast and Trump’s Trials podcast are also good.

All three of these are very U.S. centric, obviously.

So I know that will make it look correct in sync, but I guess what I’m getting at is that the comment is an example that looks right in other clients but NOT in sync.

Sync should show the list correctly like other clients do.

The bullet points in my comment here render correctly in the official Lemmy frontend, but not in Sync: https://lemmy.world/comment/6271596

I’m hoping the new update will include the new “scaled” sorting option. I think it will really help support smaller communities on Lemmy if more people use it.

IIRC Alaska Airlines knew the plane had issues and decided to keep flying it anyway.

So yes, it’s Boeing’s fault the plane’s door blew off, but Alaska Airlines also deserves blame for continuing to fly a plane that was reporting issues with the door hatch.

Simple thing, but are you sure you mounted the NFS share as NFSv4? I don’t have access to a machine to check right now, but I think it might default to mounting NFSv3, even if both sides support v4.